SMC Co.Ltd Company Logo SMC Co.Ltd
5 1

Grp Water Tanks

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Browse by Category

Contact us

SMC Co.Ltd
[Korea]

Address
2347, SMC B/D 3F,Gimpodae-ro, Tongjin-eup Gimpo-city Gyeonggi-do
Phone
82-31-9978704
Contact name
HK.KIM

Quick Information

  • Brand Name: SMCTANK-External System
  • Place of Origin: Korea
  • Model Number : GRP SECTIONAL PANEL WATER TANKS

Description

GRP WATER TANK

 

GRP Sectional Panel Water TANK consists of panel(bottom, wall, roof) and reinforcing angle.

 

GRP Tank Panel are manufactured from SMC(sheet molding compound), utilising the hot press method.

 

Being manufactured from SMC, the tank itself is maintenance free with the long life that comes from being manufactured from reinforced composites.

.

Easy installation with on-site bolt assembly and Tank shape and volume can be freely designed with no restrictions based on site location, weather or climate.

 

GRP tanks are suitable for use in the following applications.

   Potable Water Storage (drinking water)

   Rainwater Harvesting & Storage

   Emergency Water Storage

   Pump Chambers

   Effluent treatment & Storage

 

GRP tank panels are Hot Press Molded on Hydraulic compression presses

 

Using stainless steel for the interior structure and plated steel for the exterior, the panel exhibits excellent resistance to erosion.

 

 

What is SMC material ?


Sheet Molding Compound is a fibre-reinforced material, which consists primarily of a thermosetting resin glass fibres and filler.

SMC is a high tech material that is used in the manufacturing process in most of our products ranges.

 

The advantage of SMC include, high impact compressive, flexural and tensile strength along with temperature stability.

 

SMC has low profile, low shrink for excellent surface appearance and painting .

it's color pigmentable and has excellent chemical and electrical resistance varied to

provide insulation, conductivity or anti static properties.

 

FEATURES  of  GRP TANK

 

Feature 1.  Super Hygienic

 

In compliance with WRAS (Water Regulation Advisory Scheme) making with

the quality of material which is hygienic passes a taste, a smell and a poisonous etc.

5 kind test being a water tank, was verified.

 

Feature 2.  Free capacity can be designed

 

Various sized panels can make the below tanks that utilize the most horizontal and perpendicular space and also can be erected from small capacity tank to huge tank.

 

SMCTANK Co.,Ltd offers panel tanks from 0.25M3 up to a maximum of 10,000M3

 

When installing the basement of pillar, avoiding obstacles, “M”“L’ “U”shape,

Freely as can be installed.

 

Feature 3.  Safety of Bottom Panel for Water Pressure

 

The convex panel can be the water pressure created by filling the tank seals the joint preventing leakage.

 

In other type tanks, water pressure can loosen the joint breaking the seal and allowing the stored water leak out.

 

Feature 4.  Prevents Leakage

 

The joint are sealed with a special sealing tape.

It maintains soft itself and adhesives even at low temperature.

 

Feature 5. Complete Drainage

The convex bottoms with a concave drain panel system make sure complete and fast drainage.

 

It’s very useful to take a maintenance inside of water tank.

 

A.  Components of SNB GRP TANK

1.  Panel.

 

1-1.      Design of the Panel

 

SMC Co.,Ltd panel designed to be most safety panel shape through long technology.

 

Our in house research & development team designed the tank to the highest standards, utilizing the lastest technologies , to ensure that a proper multipurpose tank could be manufactured.

 

1-2.      Water Quality Testing

With independent testing and certification by WRAS in British Our Products have passed a stringent verification process, ensuring that you are purchasing  tanks manufactured to the highest standards.

 

1-3.       Hydrostatic Pressure Testing.

SMC Co.,ltd panel shall not burst, crack or leakage to test pressure of 2.4bar

In accordance with SS245:1995 specification for grp reinforced polyester sectional water tank .

 

1-4.       Panel Dimensions .

 

Width 500mm series ( WxL )

500 * 500 ( For Bottom, Roof )

500 * 924 ( For Partition)

500 * 1,000 ( Common )

500 * 1,424 ( For Partition)

500 * 1,500 ( For Side )

500 * 1,924 (For Partition)

500 * 2,000 ( For Side )

 

Width 1,000mm series (WxL)

1,000 * 924 (For Partition)

1,000 * 1,000 ( For Side )

1,000 * 1,000 ( For Bottom)

1,000 * 1,000 ( For Roof )

1,000 * 1,000 (For Piping and Drainage)

1,000 * 1,500 ( For Side ) 

1,000 * 2,000 ( For Side )

1,000 * 2,500 ( For Side )

1,000 * 3,000 ( For Side )

 

Manhole Panel

1,000 * 1,000 (Dia Ø780)

Manhole cover has double seal structure and completely block from insects, worms. .

 

2.  Joints

-       Sealant : PVC Foam Tape, Rubber syndicate

-       Bolts & Nuts : Inside(SS304,SS316), Outside(HDG / Hot Dip Galvanized)

-       Bolt cap : Prevention for Outside Bolt Rust

 

3.  Reinforcement

-       Internal Tie Rods : Stainless Steel(SS304 or SS316 Grade)

-       External Reinforcing : Structural Steel Galvanized

-       Roof Support : uPVC, Coated Steel

-       Type 1 : External System

-       Type 2 : Internally Reinforced With Tie Rods / Internal System with Tie rods

 

4.  Accessories

-       Internal ladder : GRP

-       External ladder : HDG (Hot Dip Galvanized )

-       Air Vent

-       Water Level Indicators : Clean tub with aluminum cover.

-       Nozzles : Brass , PVC , GRP

-       Bolt cap : Prevention for Outside Bolt Rust

 

Optional - Insulating

 

The heat insulation panel with 3layers structure improves heat insulation effect

(25mm foamed polyurethane insulation)

 

Protects water condensation on the outside of tank and minimizes temperature

variation of the stored water.

 

Our insulted tanks are constructed of GRP injected with foamed urethane and are

superior in their heat and cold insulation.

 

Appropriate for tank insulation in locations such as machinery rooms, rooms with high humidity or areas of cold climates.

 

Optional-Partition Water Tank

 

By installing a partition, tanks may be cleaned one compartment at a time without interrupting supply.

 

The water tank for two different  purpose are needed in a confined area of boiler facility. As an example 16ton water tank. 

 

The partition type can divided by two tanks in on as using half(8ton) for drinking water and another half(8ton) for service water. 

 

If the separated water tank installed as shown on the below picture, you have two install two different tanks with a maximum each 6tons, because you need to keep 1meter distance between each separated tanks for maintenance and operating space.

 

B. Concrete Plinth ( By Customers )

-       1no Concrete Plinth Dimentions

300mm(W) X 300mm(L) X Over 400mm(H)

-       Ex) 3m(w) x 4m(L) x 3m(H) 36Ton Capacity Water Tank.

Each concrete plinth, Need to 5nos

Total square meter : Width 3,400mm x Length 4,300mm x Height 425mm

 

Contact Us

For inquiries, please contact us via e-mail or by phone

 

SMC Co.,Ltd

H/Q : SMC B/D 3F, 2347, Gimpodae-ro, Tongjin ,Gimpo-city, Gyeonggi-do, Korea

Factory : (Ongjeong Industrial Complex) 58-67, Tongjin,Gimpo,Gyeonggi,Korea

Tel : +82-31-997 8704

Fax : +82 – 31 – 9978705

M.P : +821-10-6377 5353


Packaging & Delivery

  • Packing :Wood
  • Delivery Lead Time : 25days
  • Minimum Order : 1PC

Product Image

  • Grp Water Tanks image

Related products from premium suppliers on EC21

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To HK.KIM
SMC Co.Ltd
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Other Construction & Real Estate
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.